Motorradscheinwerfer (HeadLight) SOS

Hallo, Genossen!
Es tut mir leid für mein Deutsch (ich benutze "Google - Translate")

Ich bin der Besitzer HONDA NTV 650 (1996) aus Russland (Moskau)
Auf einem Motorrad Kunststoff "FIVE STARS" installiert.

Ich brauche deine Hilfe - sagen Sie mir, welche Art von Lampe installiert ist? Kennzeichnung oder analog?

Schäden an der Amalgamoberfläche. Wenn Sie nicht finden, eine neue oder Steuer wird diese wieder herzustellen.

PS Danke für die MANUALS NTV 650!

[Blockierte Grafik: https://pp.vk.me/c623826/v623826287/1e07a/C2DfarPfXm0.jpg]

[Blockierte Grafik: https://pp.vk.me/c623826/v623826287/1e083/Jpt1STUlJ4E.jpg] [Blockierte Grafik: https://pp.vk.me/c623826/v623826287/1e08d/iMO30He50RU.jpg] [Blockierte Grafik: https://pp.vk.me/c623826/v623826287/1e097/VEWUr-WR8xM.jpg]

Thank you, FRANK!

It's okay. In general, I studied French at school and university. However, the practice is not enough.
If you are comfortable and simple, then I will use English in Google Translate.

I know that is not original spare parts.
Just bought himself a motorcycle from your country - Germany. So how do you know how to take care of the equipment.

That's the thought that there is someone who knows at least a company or service center who installed this plastic to be able to clarify their brand headlights.

All the best,
Eugene (aka TIGR)

Zitat von Zetty

Hallo Tigr

Scheinwerfer für Five Stars Verkleidung

Thank you, Zetty!
Conclusion - no one knows what has been used light. And who knows, does not sit on the forum.

I have it now recovering.
Paint + film ORACAL 351.

If it will be interesting - lay result.

Thank you, Klemenz!
Of Course! I'll wait for the photo.

It looks like? From the above topics.

I'll be back from vacation, finish the restoration of lights. If you do not like the result, buy lenses.

Good day, comrades!

Successfully regained the spotlight. Procedure:

1. Clean the surface of the skin on the reflector;
2. Clean the surface;
3. Cut the film ORACAL 351 (352 thicker) strips and stencil upper \ lower part of the reflector;
4. Glue the strips overlap the prepared surface;
5. Warm up the hairdryer (if needed)

Photo:

The upper and lower part of the reflector
[Blockierte Grafik: http://cs624430.vk.me/v624430287/2671c/0NrY2rCnvSQ.jpg]

Failure. One piece did not work, because the film does not pull.
[Blockierte Grafik: http://cs624430.vk.me/v624430287/26725/U-fK6l-_1HM.jpg]

Stripping paint and old envelope.
[Blockierte Grafik: http://cs624430.vk.me/v624430287/2672e/kFLZVIajDo8.jpg]

Cutting the strips ORACAL 351
[Blockierte Grafik: http://cs624430.vk.me/v624430287/26737/10xV_rSM0GE.jpg]

Ready-made solution. Success.
[Blockierte Grafik: http://cs624430.vk.me/v624430287/26740/Bmulq8bPETA.jpg]

Install the headlamp test.
[Blockierte Grafik: http://cs624430.vk.me/v624430287/26749/5U2e5EphkNY.jpg]

Low and high beam.
[Blockierte Grafik: http://cs624430.vk.me/v624430287/26752/EEWsuT84BtI.jpg]
[Blockierte Grafik: http://cs624430.vk.me/v624430287/2675b/hItMlV46hVw.jpg]

Light became better. Very bright shine. I will leave the evening of April - upload photos in the twilight.

All the best,
Eugene (aka TIGR)

Greetings, comrades!
That's right - the operating temperature from -40 to +120 °C
Read a review of tests - 4 years of operation winter \ summer and unchanged.

For example.